Tubular Squeezing Machine, whose design and production is completely owned by KIRAY MAKINA, creates serious differences in pure performance and efficiency values to its closest competitors. Meticulousness in the quality of the material and production stages increases the lifetime of the machines and minimizes the operating costs. It has programmed by our own engineers.
Tubular Squeezing Machine
GENERAL FEATURES
• SPECIAL DESIGN WITH KIRAY ENGINEERING TEAM
• HIGH SPEED, HIGH EFFICIENCY
• QUIET WORKING
• OPERATION IN FULLY AUTOMATIC OR MANUAL MODE
• OPERATOR-FRIENDLY USER PANEL AND INTERFACE
• PROPERTIES OF FAULT DETECTION AND REPAIR WITH OZAKTAN WI-FI CONNECTION
• HIGH TIGHTENING CAPACITY TIGHTENING ROLLERS
• LOW WATER CONSUMPTION
• DESIGN AND AUTOMATION SOLUTIONS THAT PREVENT FABRIC EXTENSION
(WITHDRAWAL)
• FOLDING FABRIC STACKING
• THERE ARE TWO PIECES TOUCH SCREEN PANELS ON INTRO AND EXIT POSITION
• RESISTANT DESIGN AND MATERIAL SELECTION AGAINST CORROSION AND
CORROSION
• DESIGN AND SAFETY MEASURES COMPLIANT WITH CE STANDARDS
TECHNICIAL SPECIFICATIONS
| ROLLERS WIDTH & FABRIC WIDTH | 1600 mm & 1400 mm |
| WORKING WIDTH | 350 – 1400 (1400 mm FabrIc) |
| MAX. MECHANICAL SPEED (STRECHER & WITHOUT STRECHER) |
60 m/mIn. & 80 m/mIn. |
| VOLTAGE | 380V-50/60Hz – 3P+GND |
| INSTALLED POWER & E. CONSUMPTION | 20 kW & 13 kWh |
| WATER CONSUMPTION | 1,5 m3/h |
| WORKING AIR PRESSURE | 6 – 8 Bar |
| SQUEEZING PRESSURE | 2 – 6 Bar |
| SQUEEZING ROLLERS | Ø240 mm Rubber CoatIng |
| SQUEEZING PADDER | 90-95 Shore A & 30 kg/cm2 |
| IMPREGNATION PADDER | 80-85 Shore A & 20 kg/cm2 |
| STRECHER TYPE | * Permanent Magnet / Ferraro / 3 pcs. Motor * The FabrIc Is Damaged Sensor * %25 FabrIc Overfeed |
| CHEMICAL PREPARING TANK | * 200 lt AISI 304 ChemIcal Tank * DosIng System wIth Level Control |
| DIMENSION | 2610 X 5840 X 4330 mm W X L X H |
| WEIGHT | 4000 kg |
| MATERIAL | AISI 304 StaInless Steel |
| TELESERVICE | Standard Feature |
MACHINE DIMENSIONS
